{
  "_schema": "https://data.nist.gov/od/dm/nerdm-schema/v0.7#",
  "@context": [
    "https://data.nist.gov/od/dm/nerdm-pub-context.jsonld",
    {
      "@base": "ark:/88434/mds2-2911"
    }
  ],
  "@type": [
    "nrdp:DataPublication",
    "nrdp:PublicDataResource",
    "dcat:Dataset"
  ],
  "_extensionSchemas": [
    "https://data.nist.gov/od/dm/nerdm-schema/pub/v0.7#/definitions/PublicDataResource"
  ],
  "@id": "ark:/88434/mds2-2911",
  "ediid": "ark:/88434/mds2-2911",
  "version": "1.0.0",
  "doi": "doi:10.18434/mds2-2911",
  "title": "Broadband Electromagnetic Properties of Engineered Flexible Absorber Materials",
  "contactPoint": {
    "fn": "Jim Booth",
    "hasEmail": "mailto:james.booth@nist.gov"
  },
  "modified": "2023-01-17",
  "status": "available",
  "landingPage": "https://data.nist.gov/od/id/mds2-2911",
  "description": [
    "Figures and relevant data from the paper \"Broadband Electromagnetic Properties of Engineered Flexible Absorber Materials\" are found here . The paper was published on Advanced Materials Technologies in 2023. ABSTRACT:\u00a0Flexible and stretchable materials have attracted significant interest for applications in wearable electronics and bioengineering fields. Recent developments also incorporate mounted and embedded microwave circuits, components, and systems with engineered flexible materials that operate over a broadband frequency range (~1 to 100 GHz). Here we demonstrate a simple, low-cost, flip-chip technique where flexible materials are placed on top of coplanar waveguide (CPW) transmission lines for material property measurement. We apply on-wafer error correction and de-embedding techniques to determine broadband electromagnetic properties of the material-loaded transmission line segments. Finite-element simulations of material-loaded devices were employed along with the broadband measurements to estimate the electromagnetic material properties. To demonstrate this technique, we fabricated flexible polydimethylsiloxane (PDMS) composites with varying concentrations of Barium Hexaferrite (BaM) nanoparticles for potential applications in electromagnetic shielding and quantified the complex permittivity and permeability of the composites up to 110 GHz using our broadband scattering-parameter measurements. We fit the frequency-dependent permeability to models describing the ferromagnetic resonance of barium hexaferrite (BaM) nanoparticles in PDMS and estimated the constituent nanoparticle properties using the Maxwell-Garnett mixing model. This study paves way to exploit a wide range of engineered materials in flexible, wearable, and biomedical electronics applications and presents a convenient methodology to extract important broadband electromagnetic properties for applications such as electromagnetic shielding."
  ],
  "keyword": [
    "Flexible electronics",
    "microwave circuits",
    "Barium hexaferrite",
    "PDMS composites",
    "permittivity",
    "permeability"
  ],
  "topic": [
    {
      "@type": "Concept",
      "scheme": "https://data.nist.gov/od/dm/nist-themes/v1.1",
      "tag": "Electronics: Electromagnetics"
    },
    {
      "@type": "Concept",
      "scheme": "https://data.nist.gov/od/dm/nist-themes/v1.1",
      "tag": "Advanced Communications: Wireless (RF)"
    },
    {
      "@type": "Concept",
      "scheme": "https://data.nist.gov/od/dm/nist-themes/v1.1",
      "tag": "Materials: Materials characterization"
    }
  ],
  "accessLevel": "public",
  "license": "https://www.nist.gov/open/license",
  "publisher": {
    "name": "National Institute of Standards and Technology",
    "@type": "org:Organization"
  },
  "language": [
    "en"
  ],
  "bureauCode": [
    "006:55"
  ],
  "programCode": [
    "006:052"
  ],
  "_editStatus": "done",
  "theme": [
    "Electronics: Electromagnetics",
    "Advanced Communications: Wireless (RF)",
    "Materials: Materials characterization"
  ],
  "components": [
    {
      "@id": "cmps/Figure 6a.csv",
      "@type": [
        "nrdp:DataFile",
        "nrdp:DownloadableFile",
        "dcat:Distribution"
      ],
      "_extensionSchemas": [
        "https://data.nist.gov/od/dm/nerdm-schema/pub/v0.7#/definitions/DataFile"
      ],
      "filepath": "Figure 6a.csv",
      "downloadURL": "https://data.nist.gov/od/ds/mds2-2911/Figure%206a.csv",
      "mediaType": "text/csv",
      "description": "Frequency dependence for the bare test chip (air), two PDMS samples, three 30% BaM samples, and the BaM 60% sample. These values are obtained by fixing RL and optimizing CG to fit the measured, de-embedded data. The conductance is negligible when compared to capacitance values.",
      "title": "Frequency dependence of the capacitance per unit length ",
      "size": 53138,
      "checksum": {
        "hash": "64b8b5059dc73b74adf158c33d6438cee63ce96265d7f7919af4e9a22cb49fc4",
        "algorithm": {
          "tag": "sha256",
          "@type": "Thing"
        }
      }
    },
    {
      "@id": "cmps/Figure 2.png",
      "@type": [
        "nrdp:DataFile",
        "nrdp:DownloadableFile",
        "dcat:Distribution"
      ],
      "_extensionSchemas": [
        "https://data.nist.gov/od/dm/nerdm-schema/pub/v0.7#/definitions/DataFile"
      ],
      "filepath": "Figure 2.png",
      "downloadURL": "https://data.nist.gov/od/ds/mds2-2911/Figure%202.png",
      "mediaType": "image/png",
      "description": "The image depicts the electric field vectors for gold transmission lines on quartz substrate that are exaggerated for clarity (Image not to scale). The fields emanate from the signal line and ends on ground planes.",
      "title": "Figure 2: Frequency dependent R, L, C, G (per unit length) transmission line model that is used for simulations and calculations",
      "size": 219346,
      "checksum": {
        "hash": "b19ed126019498e767232abfbb21779c60637a382b45c8f8e11c44534ec00ece",
        "algorithm": {
          "tag": "sha256",
          "@type": "Thing"
        }
      }
    },
    {
      "@id": "cmps/Figure 3b.csv",
      "@type": [
        "nrdp:DataFile",
        "nrdp:DownloadableFile",
        "dcat:Distribution"
      ],
      "_extensionSchemas": [
        "https://data.nist.gov/od/dm/nerdm-schema/pub/v0.7#/definitions/DataFile"
      ],
      "filepath": "Figure 3b.csv",
      "downloadURL": "https://data.nist.gov/od/ds/mds2-2911/Figure%203b.csv",
      "mediaType": "text/csv",
      "description": "The impact of substrate and superstrate material properties on CPW transmission line capacitance, inductance, and resistance calculated from finite-element simulations. ",
      "title": "Differential superstrate capacitance vs. superstrate permittivity",
      "size": 253,
      "checksum": {
        "hash": "4538e3a6fc1979b50796bc4325ca8bfa0d01105a4ff355e2d3212df56c6eee2b",
        "algorithm": {
          "tag": "sha256",
          "@type": "Thing"
        }
      }
    },
    {
      "@id": "cmps/Figure 7b.csv",
      "@type": [
        "nrdp:DataFile",
        "nrdp:DownloadableFile",
        "dcat:Distribution"
      ],
      "_extensionSchemas": [
        "https://data.nist.gov/od/dm/nerdm-schema/pub/v0.7#/definitions/DataFile"
      ],
      "filepath": "Figure 7b.csv",
      "downloadURL": "https://data.nist.gov/od/ds/mds2-2911/Figure%207b.csv",
      "mediaType": "text/csv",
      "description": "Imaginary permittivity for two PDMS samples, three 30% BaM samples, and the BaM 60% sample. ",
      "title": "Calculated imaginary effective permittivity (\u03b5eff) vs. frequency",
      "size": 63347,
      "checksum": {
        "hash": "a164abf2ce5fa89d5549d365585fd498175f3a6784566e6e196b6029b68c55fd",
        "algorithm": {
          "tag": "sha256",
          "@type": "Thing"
        }
      }
    },
    {
      "@id": "cmps/Figure 8a.csv",
      "@type": [
        "nrdp:DataFile",
        "nrdp:DownloadableFile",
        "dcat:Distribution"
      ],
      "_extensionSchemas": [
        "https://data.nist.gov/od/dm/nerdm-schema/pub/v0.7#/definitions/DataFile"
      ],
      "filepath": "Figure 8a.csv",
      "downloadURL": "https://data.nist.gov/od/ds/mds2-2911/Figure%208a.csv",
      "mediaType": "text/csv",
      "description": "Calculated effective permeability (\u03bceff) vs. frequency for three 30% BaM samples, and the BaM 60% sample. ",
      "title": "Calculated and extracted real part of effective permeability for samples",
      "size": 34143,
      "checksum": {
        "hash": "4287e2a46b510b8778009c6cc1f76700424f9bb0c9adeaaffbd85316ce1bcfb5",
        "algorithm": {
          "tag": "sha256",
          "@type": "Thing"
        }
      }
    },
    {
      "@id": "cmps/Figure 8b.csv",
      "@type": [
        "nrdp:DataFile",
        "nrdp:DownloadableFile",
        "dcat:Distribution"
      ],
      "_extensionSchemas": [
        "https://data.nist.gov/od/dm/nerdm-schema/pub/v0.7#/definitions/DataFile"
      ],
      "filepath": "Figure 8b.csv",
      "downloadURL": "https://data.nist.gov/od/ds/mds2-2911/Figure%208b.csv",
      "mediaType": "text/csv",
      "description": "Calculated effective permeability (\u03bceff) vs. frequency for three 30% BaM samples, and the BaM 60% sample.",
      "title": "Calculated and extracted imaginary part of effective permeability for samples",
      "size": 35509,
      "checksum": {
        "hash": "9058163e9f9aa5e5a87948e127944f96a0fa348d1b9e1752d061970f1b93ca63",
        "algorithm": {
          "tag": "sha256",
          "@type": "Thing"
        }
      }
    },
    {
      "@id": "cmps/Figure 3a.csv",
      "@type": [
        "nrdp:DataFile",
        "nrdp:DownloadableFile",
        "dcat:Distribution"
      ],
      "_extensionSchemas": [
        "https://data.nist.gov/od/dm/nerdm-schema/pub/v0.7#/definitions/DataFile"
      ],
      "filepath": "Figure 3a.csv",
      "downloadURL": "https://data.nist.gov/od/ds/mds2-2911/Figure%203a.csv",
      "mediaType": "text/csv",
      "description": "The impact of substrate and superstrate material properties on CPW transmission line capacitance, inductance, and resistance calculated from finite-element simulations. ",
      "title": "Differential substrate capacitance vs. substrate permittivity",
      "size": 262,
      "checksum": {
        "hash": "60ce239e9b65492d02b7705e78c26d7af0d2e7eaf19b028d6f09f2d080cc33fb",
        "algorithm": {
          "tag": "sha256",
          "@type": "Thing"
        }
      }
    },
    {
      "@id": "cmps/Figure 7a.csv",
      "@type": [
        "nrdp:DataFile",
        "nrdp:DownloadableFile",
        "dcat:Distribution"
      ],
      "_extensionSchemas": [
        "https://data.nist.gov/od/dm/nerdm-schema/pub/v0.7#/definitions/DataFile"
      ],
      "filepath": "Figure 7a.csv",
      "downloadURL": "https://data.nist.gov/od/ds/mds2-2911/Figure%207a.csv",
      "mediaType": "text/csv",
      "description": "Real permittivity for two PDMS samples, three 30% BaM samples, and the BaM 60% sample. ",
      "title": "Calculated real effective permittivity (\u03b5eff) vs. frequency ",
      "size": 63441,
      "checksum": {
        "hash": "b1a98f1fcb2ddb0b91798dfc303c3cb3812d6c28a64ca02254e0ba8c5c56aa8d",
        "algorithm": {
          "tag": "sha256",
          "@type": "Thing"
        }
      }
    },
    {
      "@id": "cmps/README.txt",
      "@type": [
        "nrdp:DataFile",
        "nrdp:DownloadableFile",
        "dcat:Distribution"
      ],
      "_extensionSchemas": [
        "https://data.nist.gov/od/dm/nerdm-schema/pub/v0.7#/definitions/DataFile"
      ],
      "filepath": "README.txt",
      "downloadURL": "https://data.nist.gov/od/ds/mds2-2911/README.txt",
      "mediaType": "text/plain",
      "title": "Readme File for Figures with Description",
      "size": 7829,
      "checksum": {
        "hash": "19467fd7cb303ecf1f5cb702be162705c391418305fba18286b27ff8fac1a319",
        "algorithm": {
          "tag": "sha256",
          "@type": "Thing"
        }
      }
    },
    {
      "@id": "cmps/Figure 9.csv",
      "@type": [
        "nrdp:DataFile",
        "nrdp:DownloadableFile",
        "dcat:Distribution"
      ],
      "_extensionSchemas": [
        "https://data.nist.gov/od/dm/nerdm-schema/pub/v0.7#/definitions/DataFile"
      ],
      "filepath": "Figure 9.csv",
      "downloadURL": "https://data.nist.gov/od/ds/mds2-2911/Figure%209.csv",
      "mediaType": "text/csv",
      "title": "Estimates for the free-space attenuation constant for engineered BaM-PDMS composites ",
      "size": 28302,
      "checksum": {
        "hash": "c8f6b83daf9beea3c70adeae5d78f6eeac2385b104cbaaa37a376012cadc7792",
        "algorithm": {
          "tag": "sha256",
          "@type": "Thing"
        }
      }
    },
    {
      "@id": "cmps/Figure 4.png",
      "@type": [
        "nrdp:DataFile",
        "nrdp:DownloadableFile",
        "dcat:Distribution"
      ],
      "_extensionSchemas": [
        "https://data.nist.gov/od/dm/nerdm-schema/pub/v0.7#/definitions/DataFile"
      ],
      "filepath": "Figure 4.png",
      "downloadURL": "https://data.nist.gov/od/ds/mds2-2911/Figure%204.png",
      "mediaType": "image/png",
      "description": "The cables and probes from the vector network analyzer (VNA) are connected to the reference plane during measurement. The TRL calibration procedure translates 50 Ohm reference plane to probe pads. The air-loaded distance (L) of the transmission line is de-embedded to obtain RLCG distributed circuit parameters for BaM material loaded CPW space.",
      "title": "Figure 4: Material loaded transmission lines and de-embedding in test wafer ",
      "size": 673140,
      "checksum": {
        "hash": "8ea12848d7c6ff9b8021bef137da9df74d674e9e35adffaca221f9e5be0549f4",
        "algorithm": {
          "tag": "sha256",
          "@type": "Thing"
        }
      }
    },
    {
      "@id": "cmps/Figure 3c.csv",
      "@type": [
        "nrdp:DataFile",
        "nrdp:DownloadableFile",
        "dcat:Distribution"
      ],
      "_extensionSchemas": [
        "https://data.nist.gov/od/dm/nerdm-schema/pub/v0.7#/definitions/DataFile"
      ],
      "filepath": "Figure 3c.csv",
      "downloadURL": "https://data.nist.gov/od/ds/mds2-2911/Figure%203c.csv",
      "mediaType": "text/csv",
      "description": "The impact of substrate and superstrate material properties on CPW transmission line capacitance, inductance, and resistance calculated from finite-element simulations. ",
      "title": "Differential inductance vs. superstrate permeability ",
      "size": 389,
      "checksum": {
        "hash": "2a716428c987e73cd2e3746a283954df484488ef0e0a7850428bc90de3dbf5da",
        "algorithm": {
          "tag": "sha256",
          "@type": "Thing"
        }
      }
    },
    {
      "@id": "cmps/Figure 5b.csv",
      "@type": [
        "nrdp:DataFile",
        "nrdp:DownloadableFile",
        "dcat:Distribution"
      ],
      "_extensionSchemas": [
        "https://data.nist.gov/od/dm/nerdm-schema/pub/v0.7#/definitions/DataFile"
      ],
      "filepath": "Figure 5b.csv",
      "downloadURL": "https://data.nist.gov/od/ds/mds2-2911/Figure%205b.csv",
      "mediaType": "text/csv",
      "title": "Calculated and measured distributed circuit parameters - Resistance per unit length",
      "size": 52013,
      "checksum": {
        "hash": "7ce90f9486b0ef8d93dad85078a37b80a055d7574a4d2d5c249340d657607820",
        "algorithm": {
          "tag": "sha256",
          "@type": "Thing"
        }
      }
    },
    {
      "@id": "cmps/Figure 6b.csv",
      "@type": [
        "nrdp:DataFile",
        "nrdp:DownloadableFile",
        "dcat:Distribution"
      ],
      "_extensionSchemas": [
        "https://data.nist.gov/od/dm/nerdm-schema/pub/v0.7#/definitions/DataFile"
      ],
      "filepath": "Figure 6b.csv",
      "downloadURL": "https://data.nist.gov/od/ds/mds2-2911/Figure%206b.csv",
      "mediaType": "text/csv",
      "description": "Frequency dependence for the bare test chip (air), two PDMS samples, three 30% BaM samples, and the BaM 60% sample. These values are obtained by fixing RL and optimizing CG to fit the measured, de-embedded data. The conductance is negligible when compared to capacitance values.",
      "title": "Frequency dependence of the conductance per unit length (LDUT) ",
      "size": 53138,
      "checksum": {
        "hash": "0e1c41d0c0f0237e5a8b3c3fc403a78fe302bf590082e10adc0b6bb906a18a1c",
        "algorithm": {
          "tag": "sha256",
          "@type": "Thing"
        }
      }
    },
    {
      "@id": "cmps/Figure 1.png",
      "@type": [
        "nrdp:DataFile",
        "nrdp:DownloadableFile",
        "dcat:Distribution"
      ],
      "_extensionSchemas": [
        "https://data.nist.gov/od/dm/nerdm-schema/pub/v0.7#/definitions/DataFile"
      ],
      "filepath": "Figure 1.png",
      "downloadURL": "https://data.nist.gov/od/ds/mds2-2911/Figure%201.png",
      "mediaType": "image/png",
      "description": "PDMS composites with 30% and 60% (weight ratio) barium hexaferrite were directly placed on test chips with CPWs for flip chip measurements. The Reference die is used for on-wafer calibration with necessary devices to perform multiline through-reflect-line (mTRL) and series resistor calibration [Orloff2011]. Test chip has 8 identical transmission lines of 11 mm. Schematic diagrams of the top-view and cross section of the composite (superstrate) loaded transmission line are shown on the bottom and right-hand of the image.  ",
      "title": "Figure 1: Reference chip, air and composite loaded test chips subject to measurement. ",
      "size": 237753,
      "checksum": {
        "hash": "39ee59abcbd0e8c7f9518000c228262f03036545a07746a033a336f10171b51e",
        "algorithm": {
          "tag": "sha256",
          "@type": "Thing"
        }
      }
    },
    {
      "@id": "cmps/Figure 5a.csv",
      "@type": [
        "nrdp:DataFile",
        "nrdp:DownloadableFile",
        "dcat:Distribution"
      ],
      "_extensionSchemas": [
        "https://data.nist.gov/od/dm/nerdm-schema/pub/v0.7#/definitions/DataFile"
      ],
      "filepath": "Figure 5a.csv",
      "downloadURL": "https://data.nist.gov/od/ds/mds2-2911/Figure%205a.csv",
      "mediaType": "text/csv",
      "title": "Calculated and measured distributed circuit parameters - Inductance per unit length",
      "size": 45146,
      "checksum": {
        "hash": "437f467838d711a94bf2fbadd47603fb5ada8649cd7df86e9910f51c2e58132e",
        "algorithm": {
          "tag": "sha256",
          "@type": "Thing"
        }
      }
    }
  ],
  "authors": [
    {
      "familyName": "Suriyasena Liyanage",
      "fn": "Luckshitha  Suriyasena Liyanage",
      "givenName": "Luckshitha",
      "middleName": "",
      "affiliation": [
        {
          "title": "National Institute of Standards and Technology",
          "@type": "org:Organization",
          "@id": "ror:05xpvk416"
        }
      ],
      "orcid": "",
      "@type": "foaf:Person"
    },
    {
      "familyName": "Pawlik",
      "fn": "Jacob  Pawlik",
      "givenName": "Jacob",
      "middleName": "",
      "affiliation": [
        {
          "title": "National Institute of Standards and Technology",
          "@type": "org:Organization",
          "@id": "ror:05xpvk416"
        }
      ],
      "orcid": "",
      "@type": "foaf:Person"
    },
    {
      "familyName": "Evans",
      "fn": "Sarah  Evans",
      "givenName": "Sarah",
      "middleName": "",
      "affiliation": [
        {
          "title": "National Institute of Standards and Technology",
          "@type": "org:Organization",
          "@id": "ror:05xpvk416"
        }
      ],
      "orcid": "",
      "@type": "foaf:Person"
    },
    {
      "familyName": "Smith",
      "fn": "Connor  Smith",
      "givenName": "Connor",
      "middleName": "",
      "affiliation": [
        {
          "title": "National Institute of Standards and Technology",
          "@type": "org:Organization",
          "@id": "ror:05xpvk416"
        }
      ],
      "orcid": "",
      "@type": "foaf:Person"
    },
    {
      "familyName": "Stelson",
      "fn": "Angela  Stelson",
      "givenName": "Angela",
      "middleName": "",
      "affiliation": [
        {
          "title": "National Institute of Standards and Technology",
          "@type": "org:Organization",
          "@id": "ror:05xpvk416"
        }
      ],
      "orcid": "",
      "@type": "foaf:Person"
    },
    {
      "familyName": "Orloff",
      "fn": "Nathan D Orloff",
      "givenName": "Nathan",
      "middleName": "D",
      "affiliation": [
        {
          "title": "National Institute of Standards and Technology",
          "@type": "org:Organization",
          "@id": "ror:05xpvk416"
        }
      ],
      "orcid": "",
      "@type": "foaf:Person"
    },
    {
      "familyName": "Arnold",
      "fn": "David  Arnold",
      "givenName": "David",
      "middleName": "",
      "affiliation": [
        {
          "title": "National Institute of Standards and Technology",
          "@type": "org:Organization",
          "@id": "ror:05xpvk416"
        }
      ],
      "orcid": "",
      "@type": "foaf:Person"
    },
    {
      "familyName": "Booth",
      "fn": "James  Booth",
      "givenName": "James",
      "middleName": "",
      "affiliation": [
        {
          "title": "National Institute of Standards and Technology",
          "@type": "org:Organization",
          "@id": "ror:05xpvk416"
        }
      ],
      "orcid": "",
      "@type": "foaf:Person"
    }
  ],
  "annotated": "2023-05-01T15:52:55.047269",
  "revised": "2023-05-01T15:52:55.047269",
  "issued": null,
  "firstIssued": "2023-05-01T15:52:55.047269"
}